Description

Adjustable 140 needles Derma Stamp Feature:

1. 140 stainless steel pins/ titanium needles.
2. 0.0-3.0mm adjustable needle length.
3. It’s easy to use at home.
4. It’s safe for skin care.
5. It’s safety and health with independent packaging.

                  How to use

Rolling Instructions:

1. Wash your hands and the area to be treated thoroughly.
2. Wipe the skin and your hands with anti-bacterial gel (you can skip this step if you are using needle lengths of less than 0.5mm).
3. If you are using numbing cream, follow the manufacturer’s instructions for use. Always remove the cream completely before rolling (you can use cotton pads soaked with alcohol to do this).
4. Rinse the derma roller under hot running water for a few seconds.
5. Apply skin care product, if using.
6. Whilst pulling the skin taut with your free hand, roll forwards and backwards over the area to be treated. Roll 8-10 times in each direction: vertically, horizontally and diagonally (forwards and back equals two rolls). Apply sufficient pressure for the needles to penetrate the skin to their full length. Lift the derma roller slightly after each roll – this will ensure that the needles create new micro-channels in the skin rather than going over the same ones repeatedly.
7. Wash treated area and dry with a clean towel or air-dry.
8. Apply skin care product, if using.

After Treatment:
There may be some bleeding immediately after rolling but this is superficial and should simply wash away.
Your skin will be red after treatment; this is normal and will fade after a few hours.
Wait at least six hours before applying make-up and/or perfumed products to the treated area.
Avoid prolonged sun exposure for at least 24 hours after treatment.

Roller Care:
1. Rinse the derma roller under hot running water after use.
2. If there is any blood on the derma roller, soak it in warm water with a little washing up liquid added until clean. Be sure to rinse well with water.
3. Sterilize your derma roller by standing it in disinfecting alcohol for at least 20 minutes.
4. After cleaning/sterilizing, place the derma roller on a clean towel until it is dry. Once dry, replace the needle cap and store the roller in a clean place.
Whenever possible, try not to let the derma roller’s needles come into contact with any hard surface (doing so will make them blunt more quickly).
5. You will know when your derma roller needs replacing; when the needles become blunt you will find it becomes more difficult to push them into your skin.

Q1:How to place my order?
A:No matter sample order or PO, Topnotch will draft an online contractwith you via Alibaba Trade Assurance(free order protection service).Please contact us to place your order.Q2: How to confirm the Product Qualitybefore placing orders?
A:You can get free samples for some products,you only need to pay theshipping cost or arrange a courier to us and take the samples. You cansend us your product specifications and requests,we will manufacture theproducts according to your requests.Q3: How do you treat quality complaint?
A:First of all, our quality control will reduce the quality problem to nearzero. If there is a real quality problem caused by us,
we will send you freegoods for replacement or refund your loss.

Q4:How to track my order?
A:You can check the shipping status in Alibaba platform.At the same time,we will send you the tracking information once your products have shipped.

Q5: Is there any discount?
A:Yes, the much quantity, the lower price we can made.

Q6:How to calculate the weight of shipment?
A:The volumetric or dimensional weight is calculated and compared withThe actual weight of the shipment to ascertain which is greater; the higher weight is used to calculate the shipment cost. PS. The volumetricweight of a shipment is a calculation that reflects the density of a pack-age. A less dense item generally occupies more volume of space, in com-parison to its actual weight.

Q7: Do you provide the service of privatelabel and customized packaging?
A:Yes, it is our main business. We offer many resources to our clients.From full label design, custom packaging, and marketing to ingredientprocurement and mixing. We work hard to create an environment whereour clients can come to us with a single idea and leave with a completeproduct ready for sale.

Q8:Can you make custom blend?
A:Yes, we can make your own custom supplement blends and formula-tions.

Q9: How to contact us ?
A:Through Alibaba platform,e-mail,telephone,facebook or whatsapp andwe chat.